6 (12)
3.3
Defining Inputs and Outputs
In the group list, groups can be defined and values can be added to the groups.
►
To add inputs select line input in the device list and click button
Add Group
.
►
To add outputs select line output in the device list and click button
Add Group
.
→
Window
Edit Group
is opened.
►
In the Window Define a name for the group (1-64 printable ASCII characters). Each group
name can only be used once.
►
Click button
OK
.
→
Groups are entered in the device list.
►
To add a value to a group, select the group in the device list and click button
Add Value
(
2
).
→
Window
Edit value
is opened.
Fig. 3
Example: edit value
►
Configure the value parameters and click button
OK
.
Value parameter
Description
Name
Name of value (1-64 printable ASCII characters). Name is shown in the external tools (e.g.
Studio 5000). Each value name can only be used once inside a group.
Data type
Data type of the value
Length
If length is more than 1, an array is defined. Arrays can have up to 255 elements
►
Add all desired input and output groups including the desired values.
→
Groups and values are entered in the device list.
→
Each group and each value gets an index (
5
) that is used internally to address the
modules and values.
►
To modify an input, output, or value double click on the respective list entry.
►
Click button
OK
(
3
) and button
Reboot
to apply the changes.
SG-gateway Startup Guide
4.02.0400.22004 1.0 en-US
