40
M6160-i
Si8101 console
Display function
ITEM
DESCRIPTION
SCAN
The sequence of display: TMR→SPD→ DST→CAL→ODO→PULSE . In
SCAN mode, press MODE key to choose other functions.
Automatically scan through each mode in sequence every 6 seconds.
SPEED (SPD)
W/O any signal been transmitted into the monitor for 4 seconds,
SPEED will display “0.0”.
Display current training speed.
TIME (TMR)
W/O setting the target value, time will count up.
With setting the target value, time will count down from your target
time to 0, and as 0 is achieved time alarm.
W/O any signal been transmitted into the monitor for 4 seconds, time
will STOP
Range 0:00~99:59
DISTANCE (DST)
W/O setting the target value, distance will count up.
With setting the target value, distance will count down from your
target distance to 0, and as 0 is achieved distance alarm.
Range 0.0~999.9 KM
.
CALORIES (CAL)
W/O setting the target value, calorie will count up.
With setting the target value, calories will count down from your
target calorie to 0, and as 0 is achieved calorie alarm.
Range 0.0~9999 Cals.
Calorie count on the display only serves as a general guideline. For
detail calorie consumption for each individual please
consult a
physician or a nutritionist.
ODO
Accumulates total workout distance. This data can be reset to zero
when batteries are replaced.
PULSE
With pulse signal into for 6 seconds, the current pulse will display.
W/O pulse signal into for 6 seconds, it displays “P”.
Pulse alarm when over preset target pulse.
Range 0-40~230 BPM.
Summary of Contents for M6160-i
