ASSEMBLY INSTRUCTION
1.
PREPARATION:
A.
Before assembling make sure that you will have enough space around the item.
B.
Use the present tooling for assembling.
C.
Before assembling please check whether all needed parts are available (at the above of this instruction sheet you
will find an explosion drawing with all single parts (marked with numbers) which this item consists of.
2.
ASSEMBLY INSTRUCTION:
Step1: Take the front bottom tube (44)to the main frame (1) with bolt(49), arc-washer(74),nut(75). Assemble the safety
cap. Then cover front bottom tube cap (50).
Step2: Turn on the spring knob (43) left direction while pull it to loosen. Insert the
Handlebar post (51) into the Main Frame (1) simultaneously. Put the handlebar join (52)
on the handlebar post (51) with Bolt (52-1) to lock.
Step3: Take out the computer (56) fit on battery then insert in to handlebar join (52).
Connect the computer wire with the tension wire (11).
Step4: Turn on the spring knob (43) left direction while pull it to loosen. Be sure
the seat post join (57) can insert the main frame (1) successfully. Put the control
join (58) onto the seat post join (57) with lock knob (53). Assemble seat (59) onto
control join (58) and adjust to available height.
