Computer
Functions
SCAN
1. In SCAN mode, press MODE/ENTER key to choose functions.
2. Automatically scan through each mode in sequence every 6 seconds.
3. The sequence of display when press MODE/ENTER key : TIME→ DIST→
CAL→PULSE→RPM/SPEED
SPEED
1. Range 0.0 ~ 99.9
2. Without any signal being transmitted into the monitor for 4 seconds
during workout, SPEED will display “0.0”
RPM
1. Range 0 ~ 999
2. Without any signal being transmitted into the monitor for 4 seconds
during workout, RPM will display “0”
TIME
1. Without setting the target value, time will count up.
2. When setting the target value, time will count down from your target
time to 0 and alarm will sound or flash.
3. Without any signal being transmitted into the monitor for 4 seconds
durin workout, time will STOP
4. Range 0:00 ~ 99:59
DISTANCE
1. Without setting the target value, distance will count up.
2. When setting the target value, distance will count down from your
target distance to 0 with an alarm sound or flash.
3. Range 0.00~99.99
CALORIES
1. Without setting the target value, calorie will count up.
2. When setting the target value, calories will count down from your
target calorie to 0 with an alarm sound or flash.
3. Range 0~9999
PULSE
1. Current pulse will display after 6 seconds when detected by the console.
2. Without any pulse signal for 6 seconds, console will display “P”.
3. Pulse alarm will sound when current pulse is over the target pulse.
4. Range 0-30~230 BPM
Key functions
SET
1. Press SET key to increase value. Press and hold the key to increase value faster.
2. TIME setting range: 00:00~99:00 (Each increment is 1:00)
3. CAL setting range: 0~9990 (Each increment is 10)
4. DIST setting range: 0.00~99.50 (Each increment is 0.5)
5. PULSE setting range: 0-30~230 (Each increment is 1)
MODE/ENTER
1. Choose each function by pressing MODE/ENTER key.
2. Press and hold MODE/ENTER key for 2 seconds to reset all functions (same feature
as the reset key if press for 2 seconds).
RESET
1. In setting mode, press RESET key once to reset the current function figures.
2. Press RESET key and hold for 2 seconds to reset all function figures.
