110
6.5.
Tyres
Transporti ng loads with the CD1 Cargo will result in increased wear of the tyres
compared with a bicycle. Wear can be avoided on the side walls of the tyres by
ensuring suffi cient tyre pressure (refer to secti on 3.1). Reduce wear to the tyre
treads by avoiding blocking of the tyres when braking.
You will need to replace your tyres if the rubber tread is so worn down that the
braid underneath is exposed, or if the tyres have become porous due to ageing and
frequent exposure to the sun.
6.6.
Changing tyres/tubes
6.6.1.
Front wheels
It is possible to replace the tyres on the mounted front wheels. Proceed as follows
in this regard:
Ensure that the respecti ve wheel is raised off
the ground and is freely rotatable, whereby the
vehicle is supported beneath the loading area
on the corresponding side (e.g. using a beverage
crate). Alternati vely,the cargo bike may also be
lain on its side.
The long track rod beneath the loading area can bend if it is used to
support the CD1.
-> Do not use the track rod to prop up the bike.
The frame could become scratched if the cargo bike is lain on its side.
-> Lay a blanket, for example, down on the ground to protect the contact
points of the CD1 Cargo.
Maintenance
Summary of Contents for CD1 Cargo
