89
Bosch operating instructions
cific solutions are possible whereby there is no access to
the battery On/Off button; see the battery operating in-
structions).
Note:
The eBike system
always
starts in
OFF
mode for drive
units with a maximum speed of more than
25
km/h
.
The drive is activated as soon as you start pedalling (except
for in the push assistance function, (see "Switching the push
assistance on/off", page English – 4)). The motor output
depends on which assistance level is set on the on-board
computer.
As soon as you stop pedalling when in normal operation, or
as soon as you have reached a speed of
25/45
km/h
, the
eBike drive unit switches off the assistance. The drive is
automatically re-activated as soon you start pedalling again
and the speed is below
25/45
km/h
.
The following options are available for
switching off
the
eBike system:
– Press the On/Off button of the on-board computer.
– Switch off the eBike battery using its On/Off button (bi-
cycle manufacturer-specific solutions are possible
whereby there is no access to the battery On/Off button;
see the bicycle manufacturer operating instructions).
– Remove the on-board computer from its holder.
If the eBike is not moved for approx. 10 min
and
no button is
pressed on the on-board computer, the eBike system
switches off automatically in order to save energy.
eShift (optional)
eShift is the integration of electronic gear-shifting systems
into the eBike system. The eShift components are electric-
ally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate the
electronic gear-shifting systems.
Setting the assistance level
You can set the level at which the eBike drive assists you
while pedalling on the on-board computer. The assistance
level can be changed at any time, even while cycling.
Note:
In some models, the assistance level may be preset
and cannot be changed. There may also be fewer assistance
levels available than stated here.
If the manufacturer has configured the eBike with
eMTB
Mode
, the assistance level
SPORT
is replaced by
eMTB
. In
eMTB Mode
, the assistance factor and torque are dynamic-
ally adjusted according to the force you exert on the pedals.
eMTB Mode
is only available for Performance Line CX
drives.
The following assistance levels are available as a maximum:
–
OFF:
Motor assistance is switched off. The eBike can just
be moved by pedalling, as with a normal bicycle. The
push assistance cannot be activated at this assistance
level.
–
ECO:
Effective assistance with maximum efficiency, for
maximum range
–
TOUR:
Steady assistance, long range for touring
–
SPORT/eMTB:
SPORT:
Powerful assistance, for mountain biking and for
cycling in urban traffic
eMTB:
Optimum assistance whatever the terrain, rapid
acceleration when starting from a standstill, improved dy-
namics and top performance
–
TURBO:
Maximum assistance even at high pedalling
speeds, for biking sports
The requested motor output appears on the display of the
on-board computer. The maximum motor output depends on
which assistance level is selected.
Assistance level
Assistance factor
A)
Active Line
Performance Line
Performance Line CX
Cruise
Speed
ECO
40%
50%
55%
50%
TOUR
100%
120%
120%
120%
SPORT/eMTB
150%
190%
190%
210% to 300%
B)
TURBO
250%
275%
275%
300%
A)
The assistance factor may vary in some models.
B)
Maximum value
English –
3
Bosch eBike Systems
0 275 007 XD2 | (25.04.2018)
Summary of Contents for CD1 Cargo
