MAINTENANCE
WARNING:
UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY MAINTENANCE
PROCEDURES.
Slideway
Fig. 13
Fig. 12
Planetary
Seal
LUBRICATION
Slideways
The slideways (Fig. 12) should be lubricated approximately twice a year. To reach these areas,
fully lower the bowl support and remove the apron, which is secured by slotted screws. Wipe a
thin coat of Lubriplate 630AA on the bowl pad area of the bowl supports and on each slideway.
Install the apron.
Planetary Seal
Occasionally, the planetary seal (Fig. 13) may become dry and begin to squeak. To correct this,
work a little lubrication (mineral oil) under the lip of the seal.
18