background image

 

 

Note:  Due to the legacy 10BASE-T hardware constraints, in order to determine the 

length of cable you must unplug the other end of the cable from its source and 

retest it again as a floating cable. 

 

 

Warning 

 

1.

 

Always turn off the unit to save battery power. Disconnect battery connection if the 

GIGA-X is to be stored for an extended period. 

2.

 

GIGA-X is covered by a 2-year manufacturer’s warranty from the date of purchase. 

Please contact the distributor/reseller where you originally purchased the product for 

warranty or service. 

3.

 

Misuse or unreasonable treatment of the product will void the warranty. 

4.

 

LOW BAT.

 LED will light up when the voltage is lower than 2.2V.    Please replace with a 

new alkaline battery. Mixing old and new batteries is not recommended and may give 

inaccurate

 results. 

5.

 

During LEDs self test if one or more LED’s are not lit up, please check or replace the 

battery source. If the problem still persists, contact your distributor/reseller for warranty 

or service. 

 

 

Date of Purchase: ___________________ 

Serial Number: _____________________ 

Distributor info: 

 

 

 

Summary of Contents for GIGA-X







Reviews: