Hobbico C-ME HCAE10, Instruction Manual

MAINTENANCE

Propeller Installation

Be sure to match the letter on the propeller 
with the letter on the arm.

Motor/Gear/Bearing Replacement

The Motor, Gear, and Bearings can be replaced without removing 
the arm from the C-me. When installing a new gear or motor, place 
some lubricant from the old gear on the teeth of the new part.

Arm Replacement

1.  Remove the parts from the 

damaged arm.

2.  Remove the 4 large screws from 

the frame below each arm.

3.  Carefully separate the cover from the frame enough to allow 

the arm to be removed.

4.  Remove the motor wire from the slot in 

the damaged arm.

5.  Remove the damaged arm from the 

frame.

6. Install the new arm and reverse these steps.

FCC IC PRECAUTIONS

IC RSS WARNING

This device complies with Industry Canada license-exempt RSS standard(s). Operation 
is subject to the following two conditions: (1) this device may not cause interference, 
and (2) this device must accept any interference, including interference that may 
cause undesired operation of the device.

IC RADIATION EXPOSURE STATEMENT

This equipment complies with IC RF radiation exposure limits set forth for an 
uncontrolled environment. This transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter. This equipment should be installed 
and operated with minimum distance 20 cm between the radiator and your body.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
minimum distance 20 cm between the radiator and your body. This transmitter must 
not be co-located or operating in conjunction with any other antenna or transmitter.

CE COMPLIANCE INFORMATION FOR THE EUROPEAN UNION

Instructions for Disposal of Waste Equipment by Private Users 
in the European Union:

This symbol on the product or its packaging indicates this product must not be 
disposed of with other household waste. Instead, it is the user’s responsibility 
to dispose of their waste equipment by handing it over to a designated 
collection point for the recycling of waste electrical and electronic equipment. The 
separate collection and recycling of your waste equipment at the time of disposal will 
help to conserve natural resources and ensure that it is recycled in a manner that 
protects human health and the environment. For more information about where you 
can drop off your waste equipment for recycling, please contact your local city offi ce, 
your household waste disposal service or location where you purchased the product.