2
●
Do NOT overcharge the LiPo flight battery. Maximum voltage
for each battery must be followed.
●
Do NOT short-circuit the battery. Check polarity before
connecting the battery to the charger.
●
Remove the battery when it’s not in use.
●
Do NOT operate or charge unattended.
●
Do NOT use the battery if you do not understand the
warnings and proper use of the battery.
●
Always let the battery cool and “rest” between uses and
charging. Do NOT charge inside your car.
●
Inspect the battery before each use for swelling or other
malformation. If the battery has swelled, it MUST be discarded.
●
Do NOT poke, bend or damage the battery. The outer casing
is soft and can be damaged.
●
The battery must never exceed 160° F (70° C) for any reason.
INSTALL
TRANSMITTER BATTERIES
CHARGE THE FLIGHT BATTERY
-
+
NOTE:
The transmitter does not have
to be turned on to charge the battery.
1
Remove the charger
cover on the back of the
transmitter.
2
Plug the battery into the
charger as shown. The red
LED on the front of the
transmitter will come on.
3
Once the battery is fully
charged, the red LED will
turn off.
4
Unplug
the battery from the
transmitter and replace the
charger cover.
