background image

3

PRODUCT FEATURES

  

Portable: Fits in your pocket

  

Simple operation

  Optical position hold technology

  6 axis gyro stabilization

  1.3MP camera/720P video

  SD Card compatible up to 32G with FAT32 format

  Auto take-off/land

  

Instant sharing of social media

CONTENTS

Flitt Drone
Micro USB Charge Cable
Charger
Battery
Spare Propellers (4)
Quick Start Guide

SPECIFICATIONS**

Weight:

 

4.06 oz. [115g]

Width:

 

5.71 in. [145mm]

Length:

 

5.55 in. [141mm]

Height:

  

1.26 in. [32mm]

Prop Size:

 

2.91 in. [74mm]

Size:

 

 7.01 in. [178mm] 
(diagonal: prop shaft to prop shaft)

Flight Time:

 

Approximately 7-9 minutes

(**With arms extended, not including the propellers.)

LOCATION PRECAUTIONS

Flitt uses optical technology to hold in place. This works by 
taking repeated pictures of the ground and comparing the pixels 
from one picture to the next very fast. If it senses a change, 
the sensor will command Flitt to adjust its position. While this 
technology is incredible, there are some things to watch for that 
can confuse the sensor:

  

Floors that are shiny and refl ective may cause Flitt to drift as 
as it tries to follow light refl ections.

  Surfaces that are very consistent, like black asphalt, snow, 

or uniform tile fl oors, can also confuse the sensor and cause 
drifting.

  

Flying over water or anything that can move will cause Flitt 
to drift.

  

When it is windy outside and the grass or fl owers are moving,  
it may cause Flitt to drift. If you fi nd Flitt drifting where you 
are at, simply move to an area where the sensor can see 
stationary objects.

Summary of Contents for FLITT HCAE11 Series
















Reviews: