6
Settings
This button opens
1.
Instant Share Settings where the social media links are selected
2.
Camera settings
A.
Contrast
B.
Brightness
C.
Factory default settings for the camera
3.
Device settings
A.
Enter current name and password
B.
Change the current name and password
C.
Reset the app settings to the factory default values
4.
Help Menu
A.
Flitt Quick Start Guide
B.
Start Up Slide Show
C.
Flitt Manual
D
. Go To
fl ittcamera.com
E.
About (provides the current app and fi rmware version)
5.
Calibrate section has guides to help correctly calibrate the Flitt sensors.
Calibrate Accelerometer
should be performed any time the Flitt
will not remain stable when hovering. Be sure to place Flitt on a level
surface before starting this procedure.
6.
Camera Orientation
7.
Full Screen Mode
8.
Camera Timer.
Turn “ON” so the default camera action is always a 3 second delay.
SETUP
Charge the Battery
1. Unlock the battery.
2. Grip the battery from the
sides and push up.
3. Insert the battery into
the charger, then plug
the charger into any
USB power source.
*
●
The LED will be solid
while charging and
will fl ash when fi nished.
●
Always
disconnect when fi nished.
*
If the Flitt is left on, it will automatically turn off for safety. If you try
charging the battery immediately, the LED may not turn on. This is
normal. It will reset automatically after approximately 1 hour or you
can do it quickly by unplugging and reconnecting the power cord
while the battery is in the charger.
4. Insert the battery and lock in place.
