background image

Please read through this instruction booklet to 

THOROUGHLY

 familiarize yourself with the assembly and flight characteristics of this airplane 

prior to assembly. Please inspect all parts carefully before starting assembly! If any parts are missing, broken or defective, or if you have any 
questions about the assembly or flying of this airplane, please call us at (217) 398-8970 and we’ll be glad to help.

Hobbico

®

 

Inc.

 guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not 

cover any component parts damaged by use or modification. 

In no case shall Hobbico’s liability exceed the original cost of the 

purchased kit.

 Further, Hobbico, Inc. reserves the right to change or modify this warranty without notice. In that Hobbico, Inc. has no 

control over the final assembly or material used for final assembly, no liability shall be assumed nor accepted for any damage resulting from 
the use by the user of the final user-assembled product. By the act of using the user-assembled product, the user accepts all resulting 
liability. 

If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit 

immediately in new and unused condition to the place of purchase.

 To make a warranty claim send the defective part or item to Hobby 

Services at the address below:

Include a letter stating your name, return shipping address, as much contact information as possible 
(daytime telephone number, fax number, e-mail address), a detailed description of the problem and a 
photocopy of the purchase receipt. Upon receipt of the package, the problem will be evaluated as quickly 
as possible.

© 2011 Hobbico

®

, Inc. All rights reserved.

Printed in China

HCAA2560 Mnl

ASSEMBLE ONLY WITH ADULT SUPERVISION

This product is suitable only for people of 14 years and older.

WARRANTY

Hobby Services

3002 N. Apollo Dr. Suite 1
Champaign IL 61822 USA

Summary of Contents for ItCanFly Uberlite 1













Reviews: