READ THROUGH THIS INSTRUCTION MANUAL
FIRST. IT CONTAINS IMPORTANT INSTRUCTIONS
AND WARNINGS CONCERNING THE ASSEMBLY
AND USE OF THIS MODEL.
HCAZ3005 for HCAA2025 V1.0
Entire Contents © Copyright 2004
Champaign, Illinois
(217) 398-8970
E-mail: airsupport@hobbico.com
INSTRUCTION MANUAL
ALMOST-READY-TO-FLY RADIO CONTROLLED MODEL AIRPLANE
Wingspan: 68-3/4 in [1745mm] Length: 56 in [1420mm]
Wing Area: 722 sq in [46.6 dm
2
]
Weight: 6.25–6.75 lb [2835–3060 g]
Wing Loading: 21 oz/ft
2
[63 g/dm
2
] Radio: 4-5 channel
Engine: .46–.50 cu in [7.5–8.2cc] two-stroke
.52–.56 cu in [8.5–9.2cc] four-stroke
Hobbico
®
guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or
modification. In no case shall Hobbico’s liability exceed the
original cost of the purchased kit. Further, Hobbico reserves
the right to change or modify this warranty without notice.
In that Hobbico has no control over the final assembly or material
used for final assembly, no liability shall be assumed nor accepted
for any damage resulting from the use by the user of the final
user-assembled product. By the act of using the user-assembled
product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the place
of purchase.
To make a warranty claim, send
the defective part or item to
Hobby Services at this address.
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone number,
fax number, e-mail address), a detailed description of the problem
and a photocopy of the purchase receipt. Upon receipt of the
package the problem will be evaluated as quickly as possible.
WARRANTY
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign IL 61822
USA
Summary of Contents for NexStar ARF
Page 31: ...31 Correct Angle Rods Fin...
Page 32: ...32...