The Active Flight Stabilization module has been designed to
help you earn your wings. This module scans for differences
in light around the model to know the airplane's flight
attitude. When you release the sticks, it returns the model to
straight-and-level. Let's say that you are making an aileron
turn. The AFS will prevent the airplane from losing or
gaining altitude. If you lose sight of the airplane's attitude for
a second, release your sticks and your airplane will go back
to flying straight and level in about one second. When flying
in wind, the AFS will make your plane fly rock solid, even
when close to the ground. This is a great learning tool, and
as you learn, you can decrease its sensitivity until you do
not need it any more. Please see “Setting up the Automatic
Flight Stabilization module” section of this manual before
using it.
On top of the previously mentioned items, there is still one
last treat in your Hobbico NexSTAR Select package: A
RealFlight NexSTAR Edition CD-ROM. RealFlight is the
best RC airplane simulator in the market, and it is a great
learning tool. Once installed in your computer, RealFlight
will allow you to use your own NexSTAR Select radio
transmitter to fly your NexSTAR Select on your computer.
Simulators are a great learning tool because they allow you
to learn about airplane orientation, flying speed, stalling
performance, take off and landing, and the whole spectrum
of flight without any risk. The physics of RealFlight are so
close to reality that you will feel like you are flying the real
model. The RealFlight NexSTAR Edition also lets you
practice with your transmitter and all the controls on it. Learn
to fly with RealFlight, practice new maneuvers and once you
feel confident, get out there and enjoy your Hobbico
NexSTAR Select.
Before starting to build, inspect the parts in this kit to make
sure they are all included and all undamaged. If any parts
are defective or damaged, or if you need assistance with
assembly, contact Product Support.
Product Support
Phone: (217) 398-8970
Fax: (217) 398-7721
E-mail: airsupport@hobbico.com
Aside from the major components of the kit you should find
a small plastic bag with the hardware needed to assemble
your airplane. The contents of the bag should be:
❏
1 1/4-20x2" [51mm] Nylon Wing Bolt
❏
2 Nylon Fin Bolts
❏
6 #4 x 1/4" [6mm] Screws
❏
2 #4 x 3/4" [19mm] Screws
Other small parts include:
❏
1 9/32" x 14-1/4" Wing Joiner Rod
❏
2 Landing Gear Legs
❏
2 ABS SpeedBrakes
When ready to fly, you'll need some additional equipment to
fuel the plane and start the engine. The most important
items include an electric starter, 12 volt battery, or chicken
stick, fuel pump (electric or hand-crank), fueling lines and
fittings and a 1.5 volt glow plug igniter. Your flight instructor
will probably let you share his equipment for a while, but
eventually you'll need your own. Visit your local hobby
dealer or see the Hobbico catalog for a full selection,
descriptions and pricing.
Field Equipment
KIT INSPECTION
RealFlight
®
NexStar Edition
Active Flight Stabilization
™
(AFS) Module
6
Summary of Contents for Nexstar select
Page 28: ...28 Correct Angle Rods Fin ...