❑
1. Plug the wall transformer into an AC
outlet. The
power indicator light
on the wall
transformer will be green and the
charge
indicator light
will be solid red.
❑
2. Plug the battery into the charger. When
the battery is completely charged, the charge
indicator light will turn green (solid or fl ashing).
Disconnect the battery from the charger.
❑
3. Install (8) AA Alkaline batteries into
the transmitter.
❑
4. Install the Flight Battery and connect
to the ESC. Close the battery cover.
❑
1. Plug the wall transformer into an AC
outlet. The
power indicator light
on the wall
transformer will be green and the
charge
indicator light
will be solid red.
❑
2. Plug the battery into the charger. When
the battery is completely charged, the charge
indicator light will turn green (solid or fl ashing).
Disconnect the battery from the charger.
❑
3. Install (8) AA Alkaline batteries into
the transmitter.
❑
4. Install the Flight Battery and connect
to the ESC. Close the battery cover.
™
™
™
™
QUICK START
CHECKLIST
QUICK START
CHECKLIST
WARNING!!
The instruction manual must be read completely before operating
the Novus UH-1D Huey.
It contains specifi c warnings about safety and use of the
LiPo fl ight battery supplied with the Novus UH-1D Huey. All of these warnings and safety
steps must be read and understood before proceeding to the next step.
WARNING!!
The instruction manual must be read completely before operating
the Novus UH-1D Huey.
It contains specifi c warnings about safety and use of the
LiPo fl ight battery supplied with the Novus UH-1D Huey. All of these warnings and safety
steps must be read and understood before proceeding to the next step.
Bell, UH-1D Huey, emblems, logos, and body
designs are trademarks of Textron Innovations
Inc. and are used under license by Hobbico
®
, Inc.
Bell, UH-1D Huey, emblems, logos, and body
designs are trademarks of Textron Innovations
Inc. and are used under license by Hobbico
®
, Inc.
