Hobbico TZNA1100 Instruction Manual Download

Page: 4 / 12

WARRANTY

Hobbico/Revell guarantees this kit to be free from defects
in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged
by use or modification. In no case shall Hobbico/Revell's
liability exceed the original cost of the purchased kit. Further,
Hobbico/Revell reserves the right to change or modify this
warranty without notice.
In that Hobbico/Revell has no control over the final assembly
or material used for final assembly, no liability shall be
assumed nor accepted for any damage resulting from the
use by the user of the final user-assembled product. By the
act of using the user-assembled product, the user accepts all
resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return this
kit immediately in new and unused condition to the place of
purchase.
To make a warranty claim send the defective part or item to
Hobby Services at the address below:

Service-Abteilung Revell GmbH

Henschelstr. 20-30, 32257 Bünde, Germany

Tel: +49 5223 965144

Email: service@hobbico.de

Include a letter stating your name, return shipping address,
as much contact information as possible (daytime telephone
number, fax number, e-mail address), a detailed description
of the problem and a photocopy of the purchase receipt.
Upon receipt of the package the problem will be evaluated as
quickly as possible.

ADDITIONNAL ITEMS REQUIRED

This is a partial list of items required to finish the E-Xcalibur
110 that may require planning or decision-making before
starting to build. Order numbers are provided in parentheses.

RADIO SYSTEM, BATTERY AND CHARGER

To control the E-Xcalibur 110, you will require a minimum
4 channel transmitter and the matching receiver. For best
performance, a computer transmitter is recommended, such
as our 6 channel Tactic TTX50 (TACJ2652). Recommended
items are as follows:

❍

Tactic TR625 2,4 GHz 6 channel diversity receiver
(TACL0825)

❍

ElectriFly 3S 11,1V 1200 mAh 30C LiPo battery
(GPMP0836)

❍

PulseTec354 AC/DC charger (HAP0180)

BUILDING SUPPLIES

To build your E-Calibur 110, some tools are required :

❍

Adhesive hokk and loop material

❍

Sharp scissors

❍

Small screwdriver

The following items may help you during assembly. Order
numbers are provided in parentheses.

❍

CG Machine™ (GPMR2400)

❍

GreatPlanes PRO CA medium foam safe (GPMR6069)

❍

GreatPlanes PRO tips (GPMR6033)

❍

CA accelerator spray (GPMR6034)

❍

Great Planes PRO Threadlocker (GPMR6060)

❍

Hobby Knife (39000)

❍

AccuThrow™ Deflection Gauge (GPMR2405)

SPARE PARTS FOR THE E-XCALIBUR 260

Spare parts can be obtained from RC hobby retail outlets and
similar online suppliers, most likely the same one you pur-
chased the model from originally. Alternatively, if you need
assistance locating a suitable dealer, please contact Product
Support:

Service Department – Revell GmbH

Henschelstr. 20-30, 32257 Bunde, Germany

Tel. 01805 110111 (only for Germany)

(14 Cent/Min. when called from landline)

(Mobile: max 42 Cent/Min.)

Email: Hobbico-Service@Revell.de

REPLACEMENT PARTS LIST

Missing parts

Contact Product support

Manual

Contact Product support

Scale 1:1 drawing