9. Gas system
111
Gas
fi
lter
*
As an option, your caravan can be equipped with a gas filter for
the Truma DuoControl. Please observe the enclosed manufacturer’s
operating instructions. The filter pad should be changed every time
the bottle is changed.
Changing the filter pad
Use only original Truma filter pads (Art. No. 50681-01).
Gas residue: no smoking or naked flames! Shut the gas
bottle/valve and unscrew the high-pressure hose from
the gas bottle before opening!
Before handling the gas filter, make sure that it always
points downwards. Use the tool to assist with screwing/
unscrewing (included in the scope of delivery) to check
that the union nuts on the gas filter sit tightly.
• Press down on the snap-on bar and hold it pressed while turning
the filter casing to the left. Then remove the filter casing by pulling
it down.
Removing the filter casing
Exchanging the filter pad
• Remove the new filter pad from the plastic bag, slip the bag over
the previously removed filter casing and, in one turning motion,
carefully shake the old filter pad into the plastic bag. Place the
new filter pad in the filter casing in such a way that it lies flat on
the bottom of the casing.
Reinstalling the filter casing
• Hold the filter casing beneath the filter housing, as displayed
in the illustration above.
• Press the filter casing upwards and then turn it to the right so that
the snap-on bar in the filter housing snaps into place.
If using just one bottle, the free input must be shut using
the enclosed sealing cap.
