10. Built-in devices
120
APP mode in connection with an iNet Box
Function
In APP mode, the connected devices as well as the Truma CP
plus control panel switch to stand-by.
- no heating function
- no hot water generated
- air-conditioning system does not work
- the timer on the Truma CP plus control panel does not work
As soon as a new command is entered via the Truma app, the attached
devices and the Truma CP plus are activated using the set values.
Turning on the APP mode
• Press the control knob/pushbutton
q
for approx. 2 seconds until
“APP” appears on the display.
• Let go of the control knob/pushbutton
q
.
• The previously saved values will be saved.
Turning off the APP mode
The APP mode is turned off
- when the Truma CP plus control panel is alerted by briefly pressing
the adjusting knob/pushbutton
q
. The previously saved values
will then be imported for renewed operation.
Use the control knob / pushbutton
q
to select the icon in the
menu line
l
• Press to switch to the setting mode.
• Use the control knob / pushbutton
q
to select the desired
temperature.
• Press the control knob / pushbutton
q
to confirm the tempera
-
ture.
Changing the room temperature
a = heating
(HEIZ)
1)
- Heating is switched on, icon lights up.
- Adjustable range of temperature: 5 - 30°C (in increments of 1°C)
- Use the control knob / pushbutton for fast temperature changes
(on stand-by screen).
1)
The icon will continue to flash as long as the required room temperature
has not been reached.
a
3
