Electrical Installations
07-7
7.4 Function of the power generating unit
Position of the battery charger
The charger is located under the passenger seat.
Operation with 230V mains electricity
After the mains connection has been plugged in, both the
modular and the vehicle battery will automatically be charged
by the battery charger in the mobile home (even if the Control
Panel has not been switched on).
Charging procedure
The charger represents the current status of technology and
charges in three phases in accordance with the so-called
IU
0
U
1
curve. The charging period should be at least 12 hours.
Batteries do not respond well to cold temperatures; in
such cases they do not supply electricity to the on-board
circuit or absorb power from the charger. Therefore, when
travelling in winter, the heating should be turned on before
charging the batteries.
The battery voltage of both the motor battery and the
ancillary battery can be checked continuously on the
control panel.
1
2
Exterior socket
Opening
• Take hold of the bottom of the cover flap
j
and pull it
upwards.
Closing
• Remove CEE plug
k
.
• Push cover flap
j
down until you hear it lock into place.
Summary of Contents for Van Exclusive
