17
List
Enter
UP
Down
ROLLER
FUNCTION LIST
1/2
MODEL SEL
THRO CUR
PITC CUR
SWASH MIX
MIX 1
MIX 2
D/R&EXPO
TRAVEL ADJ
SUB TRIM
GYRO
The T-SIX utilizes a roller that can be rotated or pressed along with four buttons, LIST, ENTER, UP and DOWN that are used to access and program the functions.
(1) Voltage: When the transmitter voltage drops below 4.3 volts,
“Warning Low Battery” will flash along with an alarm sound. If you
are flying when this occurs, land immediately.
(2) Timer: Timer function allows you to program a Count Down timer or
Stop Watch (count up timer) to display on the main screen.
(3) Model Type: model type programs the selected model memory to
function in Helicopter or Airplane programming. You should
program the model type first when setting up a new model.
(4) Trim set up: The trim set up function allows servo movement
adjustment.
(5) Model display: you can see the selected model directly after your
model type has been selected.
6.2 Names and Functions of the Input Key
