22
7.0 Binding the Transmitter and Receiver
binding plug
(1) Insert the bind plug in the BATT/ BIND slot on the receiver.
(2) Move the throttle sticker to the LOW/OFF position. Then power on the radio.
(3) Connect the flight battery to the receiver, the LED will flash quickly.
(4) When the LED becomes a solid continuous light binding is complete.
(5) Always remove the bind plug from the receiver once bound.
Attention:
If the receiver’s LED flashes slowly whilst binding, disconnect the flight battery and wait for 60 seconds then power on the transmitter
and repeat the process again.
