HobbyZone REZO, Manual

4

Start Up

To start your quadcopter, follow this starting 

sequence:

1. 

Power on the transmitter. The transmitter beeps.

2. 

With the quadcopter on a level surface, power 

on the quadcopter. The quadcopter LEDs flash.

3. 

Fully raise the 

THROTTLE

 stick. The transmitter 

emits one short beep.

4. 

Fully lower the 

THROTTLE

 stick. The transmitter 

emits one long beep.

5. 

After the beep, binding is successful. The 

quadcopter LEDs stay solid.





Operation and Control

NOTICE: 

When the quadcopter is flying 

toward the user, control direction is reversed.

Some drifting during flight is normal. The quadcopter 

may become unresponsive at the end of the battery 

life. To recharge the battery, follow the 

Battery 

Charging

 instructions.

Motor Start

To fly your quadcopter, press the 

THROTTLE

 stick to the left-bottom 

and the 

CONTROL

 stick to the 

right-bottom. The motor starts. Or you can press the 

Right

 button once to fly the quadcopter.

Motor Stop

To stop your quadcopter, press 

the 

THROTTLE

 stick to the right-

bottom and the 

CONTROL

 stick to 

the left-bottom. 

Auto Takeoff / AutoLand

Press the 

Right

 button once, and 

the quadcopter will take off or land 

automatically.

Headless Mode

When you press the 

Headless 

Mode

 button, the quadcopter will 

orient front/back based on the 

direction it is in when you initiate 

Headless Mode

. Press the 

Headless Mode

 button 

a second time to return to normal.

NOTICE: 

In the event of a crash, the 

quadcopter motors will stop automatically to 

prevent motor damage.

NOTICE: 

The quadcopter’s flying range 

is 30m. If you fly beyond this range, the 

transmitter signal will be lost.

Flight Control