3
Step 1
4
Step 1
Charging the Aircraft Battery
The charger included with your
Super Cub LP uses unique circuitry that
ensures an accurate charge every time
and protects your Li-Po battery from the
dangers of overcharging. This charger
continually monitors the battery and
automatically stops charging when the
battery is fully charged.
DC Li-Po Balancing Charger Features
• Charges 3-cell lithium polymer
battery packs at 1.3-amps
• LED charge status indicator
• 12V accessory outlet input cord
You must charge the included Li-Po
battery pack with a Li-Po specific
charger only (such as the included
charger). Never leave the battery and
charger unattended during the charge
process. Failure to follow the
instructions properly could result in a
fire. When charging, make certain the
battery is on a heat-resistant surface.
1. The 12V DC 3S Li-Po balancing
charger provides a charge current
of approximately 1.3-amps. The
typical charge time for the
included 11.1V 1300mAh Li-Po is
approximately 1 hour.
2. Locate the safety charge lead on the
battery pack. Connect the battery
pack to the charger. Charge through
the balance lead on the battery
pack. The blue EC3 connector will
remain disconnected when using the
included charger.
3. Connect the charger to either a 12V
power outlet in a vehicle or the AC
adapter included with your Super
Cub LP. Please note that some 12V
outlets require your vehicle to be
running for the outlet to be
operational. It is recommended to
consult your vehicle owner’s
manual if you are unsure. The LED
will continually blink while the
battery charges. It is not
recommended to charge batteries
while the vehicle is in motion.
4. Charging is finished when the LED
indicator glows steadily.
