21
9. Re-install the rudder. Be certain to include the
spacers below the rudder arm.
Re-install the deck cover. Make certain
the antenna is secured.
If you have any questions regarding the
replacement of the prop/prop shaft, please call
product support at 877-504-0233
Step 1—Remove Cap
Step 2—Remove Shaft
Propeller Shaft Cap
Propeller Shaft
Rudder
Propeller/Shaft Replacement (continued)
Follow these steps to replace the prop/prop shaft:
1. Remove prop/prop shaft from cap by
unscrewing it.
2. Slide propeller and shaft out of drive tube.
3. Locate the new prop/prop shaft.
4. Slide the new prop/prop shaft into the boat.
5. Thread the prop/prop shaft into the threaded
cap. It may be necessary to use small pliers
to hold cap while shaft is being tightened.
6. Slide rubber coupler back onto motor cap.
7. Slide rubber coupler back onto the new drive
shaft cap.
8. Re-install motor and motor bracket. Make sure
that the motor leads are once again placed
inside the molded hook to keep the leads
secured and out of the way.
10.