SOLAR PUMP CONTROLLER USER MANUAL
WEB: www.hobertek.com
TEL: 0086-757-81807569
ADD:
a
F2, A14 Building, GuangDong XingGuangYuan Industry Base, LuoCun, ShiShan Town, NanHai District, FoShan
City, GuangDong Province, China
1
．
SAFETY DEFINITION:
Danger: It will cause serious injuries and even death while operating against the rules
Storage Condition:
NOTE
Temperature
Humidity
Temperature -40
℃
to +65
℃
.
5% to 90%, no condensation
Storage in dry, dust-free . Do not store in the environment containing corrosive gas, liquid.
Installation:
Danger
Wire is connected by professional person only.
Each wire connect to the device must be wrapped with electrical tape for safety.
Prohibiting the installation location:
direct sunlight, thick dust, corrosive gas or oil mist, flammable gas, liquid.
Attention
To ensure good convection cooling effect, the device must be installed
Vertically.
The height of the device installation should be over 1.1m or more, and please establish the risk identified beside the
device.
The ambient temperature -20
℃
-+60
℃
,
If Over 45
℃
,
Please make sure
well ventilated
and the backside of
controller should be covered to make sure the air of fan is output from
TOP
of controller.
Relative humidity 15%-+95%RH.
Maintenance:
Danger
Under any circumstances, without professional guidance, do not disassemble the controller or touch the internal
parts.
Forbid to maintain the controller when it is Power-on.
