•
13
Fasten the mainsheet ratchet block onto the top of the main
traveller with the clevis pin and split ring supplied. The main-
sheet system is now ready to be headed to the clew of the
mainsail. NB : It is best to leave the top block unhooked until
the boat is in the water.
MAINSHEET SYSTEM
2
Thread the tail of the mainsheet line through the cleat
and fairlead on the crossbar, through the traveller car
and then secure with a figure 8 knot at the eyesstrap
on the aft edge of the rear crossbar.
3
The mainsheet system is already mounted when
delivered with the boat.
For information, hereunder is how it is mounted.
Position the triple ratchet block and the triple top block
as indicated in the photograph.
Carefully follow the threading sequence shown in the
photographs and you should have no problems. There
should be no crossovers or twists in a properly threa-
ded 6:1 system.