3
Locate the best height for
the furler on the mast. This
will vary depending on your
kayak model. Tighten screws
with the provided Allen
Wrench once location is
determined. Stretch shock
cord attached to sail and
loop around the hook on
furler assembly. See FIG 2.
If
the shock cord is not taut
you will need to knot the
shock cord to shorten the
length.
2
Mark the appropriate
locations for the Fairlead and
Eye Post before drilling and
thru bolting.
Fairlead
Mount to the rail of the
kayak. Mark 5” behind mast
base to the center point of
the Fairlead. Use the Fairlead
as a template to mark drilling
locations. See FIG 3 & 5.
Eye Post
Mark 7” to the side of the
center of the mast base on
the top of the firewall. Use
the furler assembly to gauge
the best location for the
Eye Post. The downhaul line
should be slack but without
sag. See FIG 4 & 5.
3
Eye Post
7”
Fairlead
5”
TAUT
5”
7”
FIG 2
FIG 3
FIG 4
FIG 5
