Charging and Connecting Power | 3
hobiecat.com
Plug in your charger and
connect the charger cable
to the battery. The battery
will take about 8-10 hours
to fully charge. A green
light indicates a full charge
has been reached.
1
Remove the battery
cover on the Livewell
and plug the battery into
the tank connector as
shown.
2
Replace the battery
cover and stretch the
Bungee ® over, securing
it to the eyelet post
below.
3
Turn the switch ON
momentarily to test that
the pump is working.
Do not leave the
pump running without
circulating water, as this
could damage the pump.
4
On
Off
Summary of Contents for Livewell V2
Page 1: ...Livewell V2 Manual...
