•
8
Unfold the trampoline. Note that the side tension
lines are prethreaded. Insert the front sealed bolt
rope edge into the trampoline track of the front
crossbar. Continue feeding the trampoline into the
trampoline track and position it in the centre. Line
up the grommet in the centre of the front edge of
the trampoline with the dolphin striker post. This
will position the trampoline in the centre.
TRAMPOLINE
Trampoline fitting
Commence lacing the rear of the trampoline. The
lacing line ties off on the lacing post at the left rear
of the rear beam. Pass the line around the rod and
back around the first lacing post. Lead the line
around the second lacing post and pass it around
the rod on the first trampoline cut out. Now, come
back around the second lacing post and continue
towards the third. Continue all the way across the
beam in the same fashion and tie off loosely. Do
not attempt to tighten the rear lacing too much at
this stage.
3
1
Pull the trampoline to the back of the boat
and insert the fibreflass rod into the rear
flap of the trampoline. Leave an equal
amount protruding from each side.
2
Summary of Contents for Twixxy
Page 24: ...24 TRUMPET SPINNAKER Option...
