Ref : MA_WILDCAT_FR
Issued by : Alban ROSSOLLIN
Date : mars 2012
Up-date : 3
Page 26/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2012
Using the small pieces of fine cable provided, secure the ends of the
spreaders. Pass through the hole at the end of the spreader, and on one side
of the spreader roll two or three times around the spreader cables. Do the
same the other side, cut off any pieces that are too long, and be careful that
they are tightly rolled so that there is no risk of tearing the sail.
Once that the assembly is finished cover with tape.
Preparing the mast