background image

- 2 -                                                                        HOBOT 

Important Safety Precautions                                       

                         

Read all instructions before operating the device 

WARNING 

1.  Fasten the safety rope and tie to indoor fixture before operating the device. 

2.  Check if the safety rope is broken or the knot is loose before operating the 

device. 

3.  Set danger-warning area downstairs for no-balcony window and door. 

4.  Battery shall be full-charged (green lamp ON) before using. 

5.  Do not use it in rainy or moist day. 

6.  Turn power on before put device onto glass. 

7.  Make sure appliance can stick and stand on glass surface while put onto glass. 

8.  Before turn power off, please hold device. 

9.  Do not use it on frameless glass. 

10. Make sure put cleaning ring onto cleaning wheel correctly for no leakage. 

11. Do not spray or pour water onto the appliance. 

12. Prohibit children from using this device. 

13. Remove anything on the glass. Do not use on cracked glass. Reflective or 

coating glass might be slightly scratched due to dirt on the glass while 

operating. 

14. Keep hair, loose clothing, fingers, and all parts of body away from the openings 

and moving parts.   

15. Do not use in areas with existed flammable or combustible liquids, gas. 

 

 

Summary of Contents for HOBOT-168













Reviews: