Specifications subject to change without notice.
Hochiki America Corporation • TSE-A100
OPERATION,
continued
Punk Stick Holder Retainer
Instruction Label
Combustion Chamber
Punk Stick
Power Indicator Screw
Telescopic Pole
NOTE
1.
Use only the filter and combustion material
specified.
2.
Check battery capacity before use to assure
efficient operation.
3.
Remove batteries before long-period storage.
Storing the TSE-A100
1.
Rotate the combustion chamber to the #1
position to turn the power off.
2.
Compress the telescopic pole to its shortest
length.
3.
Replace the TSE-A100 in its carry case.
4.
Store in a cool, dry place.
5.
For extended storage, remove the batteries.
Testing a Detector,
continued
1.
Rotate the combustion chamber so the #2
arrow line sup with the power indicator screw.
The fan powers on and a steady flow of smoke
is released from the tip of the TSE-A100.
2.
Raise the extended tip of the TSE-A100 to
within 6-8' of the detector. The detector should
alarm.
If no smoke comes out, check to make sure the
punk stick is ignited, and the power indicator on
the combustion chamber is set to #2.
