GRW Weighing Scale
User Manual
5
1
8
2
3
4
6
7
List of Components:
No.
Item
<1>
Indicator
<2>
Regulator
<3>
Stainless Steel Tube
<4>
Tube Base
<5>
Stainless Steel Platter
<6>
Main Structure
<7>
Cable of Load Cell
<8>
Connector
Installation Diagram of Bench Scale
Installation Procedure:
A.
Screw <4> Tube Base and <6> Main Structure together
(with 2 screws
of Tube Base).
B.
Insert <3> Stainless Steel Tube into <4> Tube Base
(with 2 screws of
Stainless Steel Tube).
C.
Screw <2>Regulator and <3> Stainless Steel Tube together
(with 1
screw and 1 clip of Regulator).
D.
Please refer to the Diagram; pull <7> Cable of Load Cell, from the
bottom to the top, through <3> Stainless Steel Tube; and then screw
the Clip on the bottom of <4> Tube Base
(with 1 screw of Clip)
.
E.
Connect <1> Indicator with <2> Regulator. Notice the direction.
Please refer to the arrow on the diagram for proper direction.
F.
Put <5> Platter on <6> Main Structure.
G.
Insert <8>Connector into the socket of <1>Indicator. Complete
installation
※
Before using this scale, please unscrew the protecting-screw fixed
on the bottom side of the steel-welding base structure.
10
