JDC-Counting Scale
User Manual
recharge the battery (refer to page 10) as soon as
possible.
0 ~ 9 :
Press these keys to key in the unit weight or
sampling-quantity.
:
(1) Press this key to set the decimal point for the weight.
(2) Press and hold [
] key till the scale sounds beep to
enable or disable optional Backlight.
CE
:
Press this key to delete the setting of weight value.
ZERO
:
Press this key to zero the weight. WEIGHT LCD will
show
cursor on the above of
ZERO
(printed on the
display-overlay).
TARE
:
Press this key to deduct the tare weight. Put the
package or container on the platter and then press
[
TARE
] key.
cursors will flash on WEIGHT LCD
(above of
TARE
and
ZERO
).
M+
:
Press this key could save
the measured weight and
quantity values into the memory bank (up to 99 data
5
