EN © 2022 HOFFEN. All rights reserved
3-in-1 milk frother
18
HOFFEN
FROTHER CHAMBER
8. USE
Do not use excessive force to close the lid. If it does not close check if something is
blocking it.
Ensure that the cable is routed so that there is no possibility of damage, cutting,
pushing or pulling that could cause damage to the equipment or injury to you or
anyone else. Place the device on a flat, horizontal and stable surface.
The device may only be connected to a power outlet equipped with a protective pin.
If you notice that the housing, cable, base or power plug is damaged, do not turn on
the device.
Be careful not to let any liquid get inside the device enclosure! This is an electrical
appliance and liquid may cause a short circuit that may damage the appliance or
cause electric shock.
When the frother is removed from the base, all its actions cease and the pre-set work
programme is cancelled.
Lift the frother only using the handle.
Pour a quantity of milk into the frothing chamber that is equal to or higher than the
minimum filling level (85 ml), but not higher than the maximum level for frothing (120
ml) or heating (240 ml) depending on the selected function. Pouring too much milk can
result in foam overflow or even damage to the device. If the quantity of milk is less than the
Maximum fill level for
heating
Maximum fill level for
frothing
Minimum fill level
Mixer with a frothing
spring
