EN © 2022 HOFFEN. All rights reserved
3-in-1 milk frother
HOFFEN
19
minimum filling level, the milk frother may automatically switch off to protect the machine
from overheating.
The frothing or heating process can be interrupted at any time by pressing the
function button on the body of the device or, in extreme cases, by lifting the frother
from the base or disconnecting the power plug from the mains socket.
BEFORE THE FIRST USE
Take the base out of the foil and unravel the power cord. The base should be placed in
a spot where there is no risk of knocking over and where children and pets cannot
reach it. Put the frother o a base.
If all components show no visible signs of damage, plug the power plug into an
electrical outlet.
REMOVAL OF CONTAMINANTS AND PRESERVATIVES
Before using the appliance for the first time, remove any dirt or preservatives from the
inside of the appliance. It is important for your health and for keeping neutral taste of
the heated or frothed milk.
To clean the inside of the frother chamber before the first proper use, scald the inside
of the entire frothing chamber. To do that fill the chamber with boiling water and let it
sink for a moment. After this time, pour out the water and rinse the inside of the
chamber with clean water.
After it cools down, wash the inside of the chamber with a dishwashing liquid and rinse
thoroughly.
FILLING THE FROTHER WITH MILK
Take off the lid from the frothing chamber. Fill the interior of the chamber with milk to
the desired level, making sure not to exceed the extreme levels. Position the frother on
the base so that the power outlet under the kettle matches the connector on the base
and the whole device is stable.
FROTHER OPERATION
There are 3 modes of frothing and one for heating the milk. Each of the operating
modes is represented by an icon on the housing of the device near the function button:
•
- more whipped foam; for cappuccino
•
- less whipped foam; for lattes
•
- heating: warm milk, hot chocolate, cocoa
•
- cold frothing: for iced coffee
