3
21
7.1 Use
Attention!
Fill the basin with warm water. The device cannot be used for war-
ming water, as it can only maintain the temperature of water poured into the
basin.
Warning!
Never exceed the maximum water level.
1. Make sure that the device is unplugged from the power outlet.
2. Fill the water basin with warm water.
Warning!
Do not fill the device with water below the MIN level or above the MAX
level marked inside the water basin.
3. Place the device on a flat surface.
4. Connect the power plug to a power outlet.
5.
Sit down comfortably and place your feet in the water basin, first making
sure that the water in the basin is not too hot or too cold.
6. Start your massage. To do so, turn the device on by pressing the on/off switch.
Caution! For safety, keep the packaging parts (plastic bags, cardboard
boxes, Styrofoam etc.) out of children’s reach. Risk of suffocation!
Open the packaging and carefully take out the device. Make sure that the product
set is complete and that its components are undamaged. Check that plastic parts
are intact and that the power cord is undamaged. If any part is damaged or missing,
contact the dealer and do not use the product. Keep the package or recycle it in
accordance with local regulations.
6. SET CONTENTS
1. 1 x Foot bath massager
2. 1 x User manual
Minimum and maximum
water level
7. USE
