3
22
7. After use, press the on/off switch to turn off the device.
8. Disconnect the plug from the power outlet and empty the water basin.
Warning!
When emptying the water basin, make sure that no water is spilled on
the power cord.
9. Wipe the device dry, fold it and store the massager in a dry and well-ventila-
ted place, beyond children’s reach.
FOLDING THE DEVICE
Troubleshooting
Problem
Cause
Solution
The device does not work Device not plugged in to a
power outlet
Connect the power cord to a
power outlet
On/off switch set to the
‘off’ position
Set the on/off switch to the
‘on’ position
The device heats up
Empty water basin
Fill the water basin
Problem with the on/off
switch
Have the power cord replaced
by a professional
Power cord short-circuit
Turn the device over to an
authorised customer service
centre
Water temperature is too
low
The device can only ma-
intain the temperature of
water poured into the ba-
sin at the level of 32-37°C
at an ambient temperature
of 25°C
Fill the device with warm wa-
ter. The device only maintains
water temperature – it does
not heat water up.
