31
8.
When the light indicator stops flashing and stays on
continuously (after approx. 30 s), the device is heated and
ready for operation.
9. Press the steam burst switch to start the steam emission. You
will feel the vibration and at the same time hear a faint buzzing
sound.
CAUTION!
During first use, when the device is heated, allow the steam
to be emitted freely for several minutes, without directing it at
the clothes.
10. Hold the steamer handle and aim the device at the ironed
clothes.
11. Apply the device to the clothes keeping around 5 cm distance
from the cloth surface and slowly slide up and down, ironing
out the creases.
12. When ironing, you may gently tighten the ironed material.
Observe particular caution to avoid scalding.
13. To disable steam emission, press the steam burst button
again.
