•
Do not immerse the appliance in water or other liquids. Do not wash under
running water. Clean the appliance body with a slightly damp cloth. Use
the supplied brush to clean the stones.
•
You can request an electronic version of this User Manual at:
info@joinco.com.pl
7. CLEANING, STORAGE AND TRANSPORT
CLEANING:
Never immerse the appliance in water.
•
Disconnect the appliance from its USB power supply before cleaning.
•
Disassemble the grinder head by turning it counter-clockwise (according
to the symbol placed on the head
).
Clean all parts with the supplied brush and then reassemble.
•
Clean the appliance body with a slightly damp cloth.
•
Use the supplied brush to clean the stones.
STORAGE:
If you do not plan to use the appliance for a long time, store it in the original
packaging. Keep the appliance in a dry and well-ventilated place.
TRANSPORT:
Protect the appliance from shock and vibration in transport.
8. ASSEMBLY AND OPERATION
Switching on the appliance:
Press the power switch briefly. When the Power
On light turns white, the stone attached to the grinding head starts rotating.
Stone speed control:
With the power switch on, press it briefly to switch from
Setting I (High, white light) to Setting II (Max, blue light).
Switching off the appliance:
Switch off the appliance by pressing the power
switch briefly on Setting II.
Operation
Recharging:
If the Power On light starts flashing blue, the appliance is recharging. When
the Power On light is blue and steady, the battery is fully recharged.
14
