HOFFEN HH-007E, Instruction Manual

5. PACKAGING CONTENTS 

Packaging contents: ceramic heater x 1, instruction manual x 1

After opening, make sure that all listed elements are inside the packaging and check 

the device for operating order. Utilise the packaging materials in accordance with 

local regulations.

6. PRODUCT DESCRIPTION

Temperature down button

Fan speed button

On/off switch (I/0)

Temperature up button

Timer button

7. USING THE DEVICE

1. Plug the ceramic heater into a 220–240 V~, 50/60 Hz wall outlet.

2. To turn the device on, set the on/off switch (I/0) to position I – on.

A) Temperature setting:

Set the desired temperature. You can choose from the range between 15°C and 32°C. 

To  lower  the  temperature,  press  the  “–”  button.  To  increase  the  temperature,  press 

the  “+”  button  until  you  reach  the  desired  value.  Each  press  lowers  or  increases  the 

temperature by one degree. 

B) Fan speed:

To reduce or increase fan speed, press the “Speed” button. “LL” on the display is low 

fan speed and “HH” on the display is high fan speed. 

C) Timer

You can set the timer to between 1 and 12 hours. At the end of the set time, the device 

will automatically turn off. 

To choose the desired operating time, press the “Timer” button. Each press extends 

the time for one hour. When the timer hits 12, it resets.

3.  When  you  no  longer  want  to  use  the  device,  set  the  on/off  switch  to  0  –  off  and 

disconnect  the  heater  from  the  power  source.  Keep  in  a  cool  and  dry  location  until 

next use.

Attention: The portable heater automatically turns off after being on for 12 hours.

14