30
• When connected to a computer, the battery
symbol will be flashing red on the display.
• When the device is charged, the battery symbol
will glow steady green light on the display.
b.
Power adapter (not included in the set)
• Connect the micro USB power cord plug to
the charging socket on the device and the tip
USB to the USB input of the power adapter with
parameters as indicated on the label devices.
Connect the power adapter to a wall socket
electricity with the same parameters as marked
on the label on the power supply.
• When connected to the power adapter the
battery symbol will be flashing red on the
display.
• When the device is charged, the battery symbol
will glow steady green light on the display.
The charging duration depends on the charging
source and takes about 90 minutes.
Switching on/off
1. To turn on the device, press the on / of switch
in the center of the device.
2. The device turns on and the display will show the
YX power program symbol.
3. To change the program press the „M” button -
located below the on / off switch.
