3
25
2. Place the assembled parts on the detergent bottle and twist on.
3.
Place the microfibre cloth onto the washing attachment. Fasten the Velcro.
Suction attachment assembly
1. Put the suction attachment onto the device housing and press down until
you hear a click.
2. To remove the suction attachment, press the suction attachment lock button
and pull the attachment up.
7.2
Working with the device
Washing:
1. Fill the detergent bottle with water containing a washing agent. Only use
agents intended for window cleaning.
CAUTION!
Do not use aggressive strong agents nor alcohol.
2. Set the sprayer tip to the selected stream type and spray the dirty surface.
Wash using the washing attachment with microfibre cloth.
Sucking off dirty water:
CAUTION! Prior to each use, check the suction attachment for any dirt residues
(particles) that might scratch the cleaned surface.
If the suction attachment is dirty, wipe it with a clean, damp cloth.
1. Press the on/off switch on the device housing. The device will switch off.
2. Slide the device with the suction attachment installed from the top of the
surface to be cleaned (e.g. a window) to the bottom. Water drops and deter-
gent residues will be wiped and sucked into the dirty water tank.
Summary of Contents for WC-0135
Page 1: ...MYJKA DO OKIEN WINDOW CLEANER INSTRUKCJA INSTRUCTION MANUAL...
Page 2: ......
Page 18: ...318...
