Passenger Tire Changers Service Manual 07-13 Rev.B
36
TO REPLACE THE GLASSES:
Disconnect the air pressure from the machine.
Turn counter clockwise the glass to remove it from the assy.
Take the new glass and tighten it.
IMPORTANT!
BEFORE TIGHTENING THE LUBRICATOR GLASS, FILL IT WITH
THE RECCOMENDED OIL ONLY AS REPORTED ON THE USER
MANUAL AND ON DEDICATED TAG.
TO CHECK THE AIR LUBRICATION:
Move in and out the bead breaker cylinder ‘till end of stoke and make
sure, looking from the top transparent cap, that lubricator supplies one drop
of oil every 2 complete cycle of the lift.
TO ADJUST THE AIR LUBRICATION:
Take a screwdriver and turn the regulator on top of the transparent cap.
Turning clockwise the oil drops will decrease.
Turning counter clockwise the oil drops will increase.
6.3 TILTING POST CYLINDER: CHECK AND REPLACEMENT
:
30’
: 8mm tube type key, 12 and 17 mm end keys, 17mm socket, pliers
: Defective cylinder may cause the following malfunction:
1.
Slow or no motion of the tilting post.
2.
External air leaking from the flange or from the piston rod
3.
Air leaking from fittings.
4.
Air leaking trough the valve.
TO CHECK THE EXTERNAL AIR LEAKING
Disconnect air pressure.
Remove the side panel,
4.1
Remove the tilting post protection