Passenger Tire Changers Service Manual 07-13 Rev.B
47
Disconnect the air pipe. In case of air leaking in between pipes and fittings, cut a piece of pipe to renew its end
and then mount the cylinder again.
Connect the air pipe to the new cylinder.
Place the cylinder on its side of the tilt post by pressing it in
the middle with a finger.
DO NOT FORCE THE PLACING WITH HAMMER OR
OTHER HEAVY DEVICES.
Position the blocking plate on the tilt post. With the left hand. The plate must be placed in between the brackets
over the top of the tilt post.
On some models, the adjustment screw must be oriented towards the cylinder while the machines section in
opposite direction.