Passenger Tire Changers Service Manual 07-13 Rev.B
97
CHAPTER 8
TROUBLE SHOOTING SECTION
COMPLAINT 1:
Pressing the rotational pedal, the turntable does not turn in any direction, in one direction only or in
second speed only..
1.
Check the power supply at the wall.
2.
Check the power supply plug and fuses on the wall
3.
Check the power supply cable
4.
Check the rotary switch.
5.
Check the inverter switch.
6.
Check the electronic Inverter.
7.
Check the motor cable.
8.
Check the potentiometer.
9.
Check the motor.
10. Check the switch adjustment.
11. Call Snap On Hot Line Centre
COMPLAINT 2:
Tilting post does not tilt or tilt very slowly or it tilts too fast.
1.
Check the air pressure.
2.
Check if there is air leaking from the cylinder.
3.
Check if there is air leaking from the valve.
4.
Check the if the mechanical adjustment are fine.
5.
Call Snap On Hot Line Centre
COMPLAINT 3:
The tool damages the rims.
1.
Check if there are the plastic protections on it.
2.
Check if the tool is fine
3.
Check the tool clearance from the rim.
4.
Check the orientation of the tool.
5.
Check the turntable run out.
6.
Call Snap On Hot Line Centre
COMPLAINT 4:
The turntable does not hold the rims.
1.
Check the air pressure
2.
Check the teeth of the jaws.
3.
Check the jaws adjustment.
4.
Check if there is air leaking from the cylinder
5.
Check if there air leaking from the manifold.
6.
Check if there is air leaking from the valve.
7.
Call Snap On Hot Line Centre
COMPLAINT 5:
The bead breaker does not have power, or it is too slow.
1.
Check the air pressure
2.
Check if there is air leaking from the cylinder
3.
Check if there is air leaking from the valve.
4.
Call Snap On Hot Line Centre
COMPLAINT 6:
The wheel lift does not lift the wheels.
1.
Check the air pressure inlet
2.
Check the air filter.
3.
Check the wheel lift cylinder.
4.
Check the wheel lift valve.
5.
Call Snap On Hot Line Centre.
COMPLAINT 7:
The air control does not inflate the tire.
1.
Check the air control.
COMPLAINT 8:
All pneumatic cylinders are too slow.
1.
Check airline pressure inlet.
2.
Check the air pressure outlet.
3.
Check the air filter –lubricator assembly.