37
E376
Inner motor missing steps
Possible causes:
•
the inner scanner movement is not smooth or
it is striking the frame
•
the motor power supply is not configured
properly
•
there is a fault in the motor power supply board
•
there is a fault in the inner scanner motor
•
there is a fault in the camera controller board
motor drivers
•
the cable connecting the camera controller
board and the inner scanner motor is partially
unplugged or damaged
Corrective actions:
•
check all items above.
E377
Inner laser current sink or power supply failure
Possible causes:
•
the flat cable connecting the camera controller
board and the inner scanner CCD board is
unplugged, missing or damaged
•
the cable of the laser module of the inner
scanner is damaged or there is a fault in the
laser module itself
•
there is a fault in the camera controller board
laser drivers
Corrective actions:
•
check all items above.
E378
Inner laser modulation failure
Possible causes:
•
the flat cable connecting the camera controller
board and the inner scanner CCD board is
unplugged, missing or damaged
•
the cable of the laser module of the inner
scanner is damaged or there is a fault in the
laser module itself
•
there is a fault in the camera controller board
laser drivers
Corrective actions:
•
check all items above.
Summary of Contents for geodyna optima
