16
- 0055
5.4 - USER MANAGEMENT
The wheel balancer can be used at the same time by 4 different users who, by means of a simple
sequence can store their work condition and retrieve this in case of need. The names of the users can be
stored (7.2)
5.4.1 - USER STORAGE
- Correctly set the dimensions as already described at paragraphs 5.3.1 and 5.3.3
- Press
MENU
; the "MENU" window will appear on the screen
- Press
; the window will display a list of available USERS. The current USER is indicated in red.
- Press the number indicating the desired USER. The system will automatically return to the initial frame.
5.4.2 - USER RETRIEVAL
- Make a measurement spin with any dimensions
- Press the
MENU
button ; the "MENU" window will appear on the screen
- Press
, the window will display a list of available USERS. The current USER is indicated in red.
- Press the number indicating the desired USER. The system will automatically return to the initial frame with
recalculation of the unbalance values based on the actual dimensions of the retrieved USER.
- Alternatively, proceed as indicated at paragraph 5.3.2
N.B. : - the dimensions stored as USER are lost when the machine is switched off;
- USER management is also valid for ALU-M dimensions;
- the current USER is always displayed on the measurement and dimension frames
User save
Cancel
Summary of Contents for Megaspin 800
Page 3: ...0055 3 ...
