10
A
Operator Manual
1
Safety
The safety precautions must be completely understood
and observed by every operator.
THE OPERATOR MUST STAY NEAR ‘THE MACHINE,
IN GOOD POSITION OF WORK, AT THE COMMAND
UNIT SIDE (A).
ONLY THE OPERATOR MAY ACCESS THE WORK
AREA.
THE USE OF THIS DEVICE IS ALLOWED ONLY
TO PERSONNEL DULY TRAINED BY AN AUTHO-
RIZED DEALER.
ANY TAMPERING WITH OR MODIFICATION OF
THIS DEVICE OR ITS PARTS OR COMPONENTS
NOT PREVIOUSLY AUTHORIZED BY THE MANU-
FACTURER WAIVE THE MANUFACTURER FROM
ANY DAMAGE RESULTING FROM OR RELATED
TO THE ABOVE-MENTIONED TAMPERINGS.
REMOVING OR BYPASSING SAFETY DEVICES
OR WARNING LABELS OF THE MACHINE IS A
VIOLATION OF THE SAFETY REGULATIONS.
THE USE OF THIS DEVICE IS ALLOWED ONLY
IN LOCATIONS WITH NO EXPLOSION OR FIRE
HAZARD.
THE INSTALLATION SHALL BE CARRIED OUT
ONLY BY QUALIFIED PERSONNEL AND WITHIN
THE SCOPE OF THE INSTRUCTIONS PROVIDED
IN THIS MANUAL.
THIS DEVICE IS DESIGNED TO ACCEPT ORIGI-
NAL SPARE PARTS AND ACCESSORIES ONLY.
CHECK FOR POSSIBLE DANGEROUS CONDI-
TIONS DURING THE OPERATION OF THE MA-
CHINE. IN SUCH A CASE STOP THE MACHINE
IMMEDIATELY.
IN CASE OF DEFECTIVE FUNCTIONING, STOP
THE MACHINE AND CALL THE AUTHORIZED
DISTRIBUTOR FOR ASSISTANCE.
DURING USE AND MAINTENANCE OF THE
MACHINE IT IS MANDATORY TO COMPLY WITH
ALL LAWS AND REGULATIONS FOR ACCIDENT
PREVENTION.
THE ELECTRICAL SYSTEM MUST HAVE AN
EARTH CABLE AMD THE MACHINE EARTH CABLE
(YELLOW/GREEN) MUST BE CONNECTED TO THE
EARTH CABLE OF THE MAINS SUPPLY
Summary of Contents for Monty 1270 Smart
Page 54: ...54 B L A N K P A G E ...
